CBD Oil Extraction

CBDISTILLERY

Buy CBD Oil Online

A Comprehensive Review on the Techniques for Extraction of Bioactive Compounds from Medicinal Cannabis 5 School of Environmental and Life Sciences, College of Engineering, Science, and Full Spectrum CBD Extraction: How is CBD extracted? What is the difference between Full Spectrum and other types of CBD? Find out here. CBD Oil Extraction & Processing Consumers are discovering the health benefits of CBD oil which is becoming a key ingredient in many products on the market today, including: Beverage infusions,

A Comprehensive Review on the Techniques for Extraction of Bioactive Compounds from Medicinal Cannabis

5 School of Environmental and Life Sciences, College of Engineering, Science, and Environment, The University of Newcastle, 10 Chittaway Road, Ourimbah, NSW 2258, Australia; [email protected]

1 School of Science, College of Sciences, Engineering, Computing Technologies and Health and Medical Sciences, RMIT University, Bundoora, Melbourne, VIC 3083, Australia

2 NICM Health Research Institute, Western Sydney University, Penrith, NSW 2751, Australia; [email protected]

4 Complex Carbohydrate Research Centre, University of Georgia, 315 Riverbend Road, Athens, GA 30602, USA; [email protected]

5 School of Environmental and Life Sciences, College of Engineering, Science, and Environment, The University of Newcastle, 10 Chittaway Road, Ourimbah, NSW 2258, Australia; [email protected]

Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).

Associated Data

Abstract

Cannabis is well-known for its numerous therapeutic activities, as demonstrated in pre-clinical and clinical studies primarily due to its bioactive compounds. The Cannabis industry is rapidly growing; therefore, product development and extraction methods have become crucial aspects of Cannabis research. The evaluation of the current extraction methods implemented in the Cannabis industry and scientific literature to produce consistent, reliable, and potent medicinal Cannabis extracts is prudent. Furthermore, these processes must be subjected to higher levels of scientific stringency, as Cannabis has been increasingly used for various ailments, and the Cannabis industry is receiving acceptance in different countries. We comprehensively analysed the current literature and drew a critical summary of the extraction methods implemented thus far to recover bioactive compounds from medicinal Cannabis. Moreover, this review outlines the major bioactive compounds in Cannabis, discusses critical factors affecting extraction yields, and proposes future considerations for the effective extraction of bioactive compounds from Cannabis. Overall, research on medicinal marijuana is limited, with most reports on the industrial hemp variety of Cannabis or pure isolates. We also propose the development of sustainable Cannabis extraction methods through the implementation of mathematical prediction models in future studies.

1. Introduction

There has been an increased interest in medical applications of cannabis over the last decades. Cannabis can be classified based on genetics, phenotypic properties, and chemical composition. All these types are rich in bioactive phytochemicals. However, the phytochemical composition varies in different types. For instance, Cannabis sativa or industrial hemp has a higher cannabidiol (CBD) level than Cannabis indica and Cannabis ruderalis, whereas Cannabis indica has a higher level of the psychoactive cannabinoid delta-9-tetrahydrocannabinol (Δ 9 -THC), and Cannabis ruderalis has a lower level of Δ 9 -THC as compared to Cannabis sativa [1]. Most of the cannabinoids in Cannabis are derived from cannabigerolic acid (CBGA) via olivetolate geranyl transferase [2]. CBGA is then converted to major cannabinoids, such as Δ 9 -tetrahydrocannabinolic acid (THCA), cannabidiolic acid (CBDA), and cannabichromenic acid (CBCA) by oxide cyclase enzymes, including THCA synthase, CBDA synthase, and CBCA synthase in trichomes [3]. A nonenzymatic reaction caused by drying, heating, or combustion can further produce other active compounds ( Figure 1 ). For instance, tetrahydrocannabinol (THC) can be converted to Δ 8 -THC, cannabinol (CBN), and cannabinolic acid (CBNA). CBD and cannabichromene (CBC) can be converted to cannabicyclolic (CBL), cannabicyclolic acid (CBLA), and cannabigerol (CBG) [4].

Biosynthesis of cannabinoids: cannabigerolic acid; CBGA, tetrahydrocannabinolic acid synthase; THCAS, cannabidiolic acid synthase; CBDAS, cannabichromene acid synthase; CBCAS, tetrahydrocannabinolic acid, THCA; cannabidiolic acid; CBDA, cannabichromenic acid; CBCA, cannabinolic acid; CBNA, cannabichromene; CBC, cannabidiol; CBD, cannabigerol; CBG, cannabinol; CBN, tetrahydrocannabinol; THC.

Cannabis has been traditionally used worldwide as herbal medicine for many years. Recently, commercial products have been developed for convenient uses [5]. In Australia, the two products registered at the Australian of Therapeutic Goods (TGA) are Epidyolex ® (CBD) and Sativex Oromucosal Spray (nabiximols ® ). Various pharmaceutical products are available in the form of tablets, capsules, and sprays, which can only be obtained via prescription, and unregistered drugs require special approval under the TGA special scheme or Authorised Prescriber Scheme [6]. Cannabis is a rich source of phytochemicals with over 125 types of cannabinoids and 400 non-cannabinoids like flavonoids, alkaloids, phenols, and terpenes [7]. These phytochemicals have been linked to various health benefits. For example, Δ 9 -THC and CBD are associated with inflammation and pain reduction [8]. CBD is known to have antipsychotic, anxiolytic, and antiepileptic properties [9]. CBD is also reported to associate with the prevention of Alzheimer’s disease [10], Parkinson’s disease [11], schizophrenia and psychosis [12], and various types of cancer [13]. In addition, other compounds, such as THC, GBG, CBC, and CBN, have also been linked with various health benefits. THC has shown therapeutic activity against arthritic and inflammatory conditions [14], autism [15], Parkinson’s [16], glaucoma [17], and cardiovascular disorders [18,19]. GBG and CBC have strong antibacterial and antifungal effects [20], along with the potential effect of CBN on insomnia and sleep disorders [21]. Despite the current evidence on Cannabis, further research is still warranted to explore the interaction of other drugs with medicinal Cannabis [22].

The extraction of Cannabis phytochemicals is a vital step to separate bioactive molecules from the plant matrix and to enhance the diverse applications of these compounds in the pharmaceutical and food industries. Extraction can be conducted using conventional and advanced techniques. The efficiencies of conventional and advanced methods mainly depend on the critical input parameters. Therefore, understanding the nature of the plant matrix and the chemistry of bioactive compounds is necessary [23]. Conventional and advanced techniques have also been studied to maximise the extraction of phytochemicals from Cannabis [24,25]. However, due to the high demand for medicinal Cannabis in recent years, a deeper understanding of the Cannabis chemical space and how to effectively reduce the costs of extraction and phytochemical isolation is crucial for further applications. This review portrays the knowledge for extraction and isolation of phytochemicals from Cannabis by outlining major phytochemicals in Cannabis, discussing the factors affecting the extraction efficiencies of phytochemicals, reviewing the current extraction techniques, which have been applied for Cannabis-derived phytochemicals, and proposing considerations for future studies.

2. Major Cannabis Phytochemicals and Their Therapeutic Effects

Cannabis exists in a variety of forms; of those, hemp and marijuana are the most well-known types. A hemp variety of Cannabis may grow taller and faster, but it does not generate as much THC, the psychoactive ingredient of marijuana. Marijuana strains are rich in THC and CBD and are used for medical and recreational purposes [26]. Different strains of Cannabis are available, either pure Cannabis genus, including C. sativa, C. indica, and C. ruderalis, or hybrid varieties. Chemotaxonomically, Cannabis is classified based on the phytocannabinoids (PCs) content, including THC and CBD in particular [27]. The most commonly grown Cannabis species are sativa and indica, where ruderalis is short and produces trace THC amount and is thereby not commonly grown for medicinal or industrial purposes [28]. C sativa is an energising strain with common psychoactivity, so it is known for being a ‘head high’, whereas indica is more commonly used for relaxation as a sedative and is regarded as ‘body high or couch lock’ [29,30].

Over 320 phytochemical compounds have been identified in Cannabis; of those, 125 cannabinoids and 198 non-cannabinoids have been found in Cannabis ( Figure 2 ) [7]. PCs are produced in the glandular hairs of the Cannabis plant (Figures S1–S3) [7]. THC and CBD are the most common psychoactive and non-psychoactive cannabinoids, respectively, which are derived from cannabigerol acid (CBGA) [2] and from the decarboxylation of their respective acids, such as THCA, CBDA, and CBCA ( Figure 1 ). Intriguingly, recent advances in analytical platforms enable the subnanomolar detection and quantitation of cannabinoids in different biological matrices [31]. THCs are the primary psychoactive lipids with an incredibly low water solubility (0.003 mgmL −1 ) [32]. Therefore, various solubilizers or emulsifiers and advanced nanosized drug delivery systems have been applied to increase their bioavailability [33,34,35,36,37,38]. In addition, some formulations are employed to minimise the pharmacokinetic and pharmacodynamic variabilities of cannabinoids [39]. However, different behavioural effects in rats were reported for different pharmaceutical preparations of ∆ 9 -THC [40].

Major phytochemicals identified from cannabis.

CBG, CBD, CBND, cannabielsoin (CBE), cannabicyclol (CBL), cannabinol (CBN), cannabitriol (CBT), and cannabichromene (CBC)-like cannabinoids have also been isolated and fully characterised from Cannabis extracts. CBG can interact with 5-hyroxytryptamine (5-HT1A) and α-2 adrenoreceptors to have therapeutic potential in Parkinson’s, Huntington’s, inflammatory bowel diseases, and multiple sclerosis [41]. The lucrative non-psychoactive CBD displayed potential therapeutic effects in neuropsychiatric disorders, cancers, and pain management with diverse molecular targets and signalling pathways [42,43,44,45,46,47,48]. Cannabielsoin (CBE) was recently reported to control neuropathic pain via the modulation of the Wnt/β-catenin pathway [49]. Moreover, nine CBC-type and eleven CBN-type PCs were also identified. The potential neuroprotective effect of minor PCs such as CBG, CBDV, CBC, CBN, ∆ 9 -THCV, and ∆ 9 -THCA was recently reviewed [50]. Thirty miscellaneous PCs, together with nine cannabitriol (CBT)-type PCs, were also isolated and characterised.

Forty-two NC phenols were identified in Cannabis and are subclassified into 16 spiro-indans, 12 dihydrostilbenes, 7 dihydrophenanthrenes, and 7 simple phenols [7]. In addition, 34 Cannabis flavonoids were also isolated and fully characterised [7]. On the other hand, the second major subclass of NCs is terpenes, where 61 monoterpenes (C10) and 51 sesquiterpenes (C15) were isolated from Cannabis with a few reported di- or triterpenoids, as recently reviewed by Radwan et al. [7]. The anticancer effects of Cannabis flavonoids and terpenes were reviewed [51] alongside the different biological activities of Cannabis phenolics [52]. Various preclinical or in silico studies have outlined the antioxidant, antiparasitic, anti-inflammatory, neuroprotective, and antiviral potential of cannaflavins [53].

Alkaloid is another non-cannabinoid subclass that has been detected in Cannabis roots. Briefly, two spermidine alkaloids have been isolated and identified—namely, cannabisativine [54] and anhydrocannabisativine [55] in the methanolic root extract or ethanolic leaves/roots extract of C. Sativa, respectively. Notably, Cannabis roots are not a significant source of cannabinoids, and the currently available data on roots support their ethnobotanical potential in inflammation and pain [56].

3. Factors Affecting the Extraction Efficiency of Phytochemicals from Plant Materials

Numerous factors have influenced the extraction efficiency of phytochemicals from plant materials, including Cannabis. The major influencing factors affecting the extraction efficiency of phytochemicals from plant materials are shown in Figure 3 . Understanding these factors can help establish the optimal conditions for the cost-effective extraction of the target compounds from the plant matrix. Plant materials play an important role in the extraction efficiency of their bioactive compounds. Each plant material has specific matrix, structure, and phytochemicals; therefore, the extractability of the phytochemicals varies depending on the type of material. With the same plant material, different parts, such as leaves, stems, roots, and flowers, have different extractability of the target compounds [57]. In addition, fresh, dried, or ground plant materials with small particle sizes have different extraction efficiencies when the extraction is performed under the same conditions [58,59]. Although no specific studies have been reported to compare the impact of different drying conditions and particle sizes on bioactive compounds from Cannabis, it is worthwhile to consider future studies for the better selection and preparation of starting materials for the extraction of bioactive compounds.

Factors affecting the extraction efficiency of plant bioactive compounds.

Solvents are known to directly affect the extraction efficiency of phytochemicals from plant materials. With a range of solvents from polar to nonpolar, various compounds with corresponding polarities can be extracted into solvents, depending on the polarities of the solvents and target compounds. Typically, a combination of polar and less polar solvents is more effective in extracting phytochemicals from plant materials [60]. The volume of solvents or materials and the solvent ratio has been reported to affect the extraction efficiency of phytochemicals from plant materials. Theoretically, the less volume of solvents used, the less extraction efficiency can be obtained because of the saturation [61]. However, a suitable material-to-solvent ratio needs to be applied for cost-effective purposes as more energy is needed to heat the larger volume. In addition, more energy is required to remove water for further concentration or the production of powder.

In some cases, the pH of the solvent has been found to influence the extraction efficiency of the target compounds, as acidic solvents are believed to disrupt the cell walls faster, thus increasing the extraction efficiency. In addition, bioactive compounds are more stable under acidic conditions [61]. Therefore, comprehensive studies are warranted to identify the right solvents, solvent-to-material ratios, and pH for the maximum extraction of phytochemicals from Cannabis.

Temperature and length of extraction have been reported to affect the extraction efficiency of phytochemicals from plant materials. A higher temperature with a longer extraction time usually leads to a higher extraction efficiency. However, the stability of phytochemicals can decrease when they are exposed to high temperatures for a long time because most phytochemicals are sensitive to heat [58,61]. Therefore, it is important to determine the most suitable temperature and length of extraction to extract a high level of phytochemicals with minimum degradation. Agitation and pressure have been found to influence the extraction efficiency of phytochemicals from plant materials. Studies have reported that agitation significantly increases the extraction efficiency of phytochemicals compared to non-agitation [62]. Extraction with high pressure has improved the extraction efficiency of phytochemicals [63]. The number of extractions or extraction time has been found to affect the extraction efficiency. The more extraction time is applied for the same quantity of the sample, the more phytochemicals can be extracted [58]. It is similar to the material-to-sample ratio, the use of more solvents for extraction leads to more phytochemicals in plant matrixes that can be released into solvents. However, it should be considered carefully, as more energy is required to heat up the larger solvent volume as well as to remove solvents. Finally, extraction techniques have been reported to significantly affect the extraction efficiency of phytochemicals from plant materials. Extraction techniques can be categorised into two major groups, including conventional extraction techniques and advanced techniques. In some cases, advanced extraction techniques show more efficiency than conventional techniques [64,65]. However, the cost of setting up on a commercial scale is a major limitation for the advanced techniques. Conventional and advanced techniques have been applied for the extraction of phytochemicals from Cannabis and are summarised in Table 1 and are further discussed in Section 4.

See also  CBD Plus Delta 8 Gummies

Table 1

Extraction of phytochemicals from Cannabis.

Extraction Technique Extraction Conditions/Procedures Advantages and Limitations References
Solvent extraction The plant materials (0.9–1.1 g) were crushed and extracted in 45-mL ethanol for 15 min with the agitation of 400 rpm. Extracts were centrifuged briefly for 30 s at 2000 rpm. The supernatant was collected and filtered. A simple technique, but not very efficient [66]
Solvent extraction Samples were extracted in hexane and ethanol mixture at 7:3 (v/v) and shaken for 45 min at 225 rpm in a TU-400 orbital shaker incubator at room temperature to obtain the extract. A simple technique, but not very effective [67]
Solvent extraction Samples were extracted in ethanol at room temperature for 45 min to obtain the extract. A simple technique, but not very effective [68]
Solvent extraction The plant material (100 g) was Pulverised and extracted with 500-mL petrol ether acidified with acetic acid (0.5-mL CH3COOH in 500-mL PE). The filtrated extract was re-extracted 3 times with 400 mL of NaOH and Na2SO3 (2% each). These combined extracts were acidified with 500 mL of 5% sulfuric acid until pH reached 3 and immediately extracted 3 times with 400-mL TBME. These combined organic extracts were dried with Na2SO4, filtrated, and concentrated in a rotary evaporator at 25–30 °C with cryostatic cooling of the vapours. The concentrate was dried overnight at vacuum conditions, yielding 1.71-g brown amorphous material. A simple technique, but not effective and difficult for commercial production [69]
Soxhlet extraction Ground dried samples (2 g) were extracted using Soxhlet extractor for 1, 2, or 3 h with 75 mL of n-hexane or methanol then cooled to room temperature to obtain the extract. A simple technique, but not effective [70]
Sonication The dried and pulverised plant material (50 g) was extracted by sonication and periodic shaking (30 min) with 250-mL petroleum ether, which was acidified with 0.5-mL concentrated acetic acid. The extract was further extracted 3 times with 200 mL of an aqueous solution (2% w/v each) of sodium hydroxide and sodium sulphite. The combined and cooled water phases were acidified with about 250-mL cooled sulphuric acid to pH 3 and immediately extracted 5 times with 200-mL diethyl ether. The combined organic phases were dried with sodium sulphate and evaporated to dryness. Quite effective advanced technique, but it is challenging to apply on a commercial scale [71]
Sonication Samples (1 g) were extracted with 10 mL of the extraction solution (100 μg/mL of n-Tridecane in ethyl acetate) by sonication for 15 min to obtain the extract. An advanced technique, but not under optimal conditions [72]
Ultrasound-assisted extraction (UAE) A small amount (0.25 g) of the sample was mixed with 10 mL of ethanol and was then extracted 3 times using UAE at 40 °C for 15 min. The solution was then filtered through a paper filter to obtain the final extract. An advanced technique, but not under optimal conditions [73]
Pressurized liquid extraction (PLE) Samples of Cannabis (0.3 g) were mixed with sand and then placed into a 22-mL stainless-steel extraction cell with a cellulose filter. The sample cells were then closed and placed into the carousel of the ASE 200 system. Methanol or n-hexane was used as extraction solvents. Extractions were carried out at 25, 50, 75, 100, 125, and 150 °C at a pressure of 40 bar. Extractions were performed for 5, 10, 15, or 20 min. After the extraction process, the extraction cell content was flushed with the same solvent in the amount equal to 60% of the extraction cell volume and purged for 60 s by applying pressurized nitrogen (at 150 psi) to obtain the final extracts. An advanced technique, but it has not been operated under optimal conditions. [70]
Ultrasound-assisted extraction (UAE) A small amount (0.25 g) of sample was mixed with 10 mL of ethanol and was then extracted 3 times using UAE at 40 °C for 15 min. The solution was then filtered through a paper filter to obtain the final extract. An advanced technique, but not under optimal conditions [73]
Pulse electric field extraction (PEF) The seeds were treated by the PEF process (0, 3, and 6 kV/cm). The PEF process was conducted with a capacity of a process chamber of 4 L. Maximum voltage of the instrument was 7 Kv, and its capacitance was 8 μF. An advanced technique, but not under optimal conditions [74]

4. Current Techniques for Extraction of Phytochemicals from Cannabis

4.1. Conventional Extraction of Phytochemicals from Cannabis

Cannabis is chemically diverse, with cannabinoids, phenolic compounds, and terpenes being the most important phytochemicals [75]. Several conventional extraction techniques have been applied to extract phytochemicals from Cannabis using various solvents [75,76,77,78,79,80,81,82,83]. Different conventional extraction methods, including Soxhlet extraction, maceration, and dynamic maceration, have been employed to extract phytochemicals from Cannabis [68,75,76,80,82]. However, studies have also revealed the caveats of using conventional extraction methods, such as the extraction of unwanted substances and degradation of heat-sensitive compounds due to extraction under high temperature [84]. As cannabinoids, phenolic compounds, and terpenes are the three main classes of secondary metabolites in Cannabis, the conventional extraction of these main classes is discussed further in the following subsections. The extraction of phytochemicals from Cannabis are summarised in Table 1 .

4.1.1. Conventional Extraction of Cannabinoids

Cannabis contains 125 individual cannabinoids, but Δ 9 -THCA and CBDA are the most predominant [81]. These two compounds undergo decarboxylation to produce Δ 9 -THC and CBD [81,85] ( Figure 1 ). Ethanol has been found as an effective solvent in extracting cannabinoids using hot maceration [68,75] as well as Soxhlet extraction [86]. However, the extraction efficiency of these two conventional techniques was significantly lower than that of the advanced microwave-assisted extraction [86]. Although conventional extraction techniques have advantages such as simple procedures, easy operations, and affordability, these conventional techniques have several drawbacks, including longer extraction times and the demand for larger solvent volumes, leading to an inclined overall operation cost and harmful environmental impact compared to modern techniques [80]. Furthermore, a stable high temperature of Soxhlet extraction has also been reported to accelerate the degradation of THCA to THC and, finally, to CBN, leading to high levels of THC and CBN in the extract [70,80]. A recent study extracted CBD from inflorescences of C. sativa using the methanol solvent maceration technique and supercritical fluid extraction technique and found that conventional extraction obtained a higher oil yield but lower CBD in comparison with supercritical fluid extraction [81].

Another conventional extraction technique called dynamic maceration has also been applied to extract cannabinoids, mostly from industrial hemp [79,80]. Dynamic maceration is a solid-lipid extraction procedure where a sample is soaked in organic solvents that were selected based on the polarity of the target compounds at a specific temperature for a specific time and then agitated [79,80]. Ethanol, acetonitrile, and hexane are the common solvents used to extract cannabinoids [87,88,89]. Ethanol was reported to be more efficient in extracting acidic cannabinoids using dynamic maceration than other organic solvents (hexane, acetone, and methanol); however, for neutral cannabinoids, ethanol is on par with other organic solvents [79]. Ethanol was also found to be more effective than other organic solvents in different studies [73,90]. Furthermore, organic solvent mixtures such as methanol and chloroform at 9:1 (v/v) were effective to recover cannabinoids from C. sativa under constant agitation [91]. Interestingly, Romano and Hazekamp [92] discovered that olive oil is more effective in extracting Cannabis oils containing cannabinoids and terpenes than ethanol, which also extracts chlorophylls, imparting a distinct green colour and unpleasant taste in the final product. The cannabinoid degradation rate was found to be much slower in olive oil extracts as compared to ethanolic extracts [80,93].

4.1.2. Conventional Extraction of Phenolic Compounds

Three major classes of phenolic compounds, flavonoids, stilbenoids, and lignans, have been identified in Cannabis [52,75,94]. Acetone, methanol, ethanol, and their aqueous mixtures are the common organic solvents to extract phenolic compounds from industrial hemp. Most of these studies quantified the phenolic compounds of the hemp extracts by the overall determination of the total phenolic content and total flavonoid content. In addition, several studies have quantified individual phenolic compounds, such as caffeic acid, gallic acid, rosmarinic acid, p-OH-benzoic acid, ferulic acid, 3,4-dihydroxybenzoic acid, p-coumaric acid, syringic acid, quercetin, luteolin, canniprene, cannflavin A, cannflavin B, catechin, naringenin, isorhamnetin, resveratrol, rutin trihydrate, apigenin, and apigenin 7-glucoside in the extracts [95,96,97,98]. Of note, most conventional extraction was conducted at room temperature and not under optimal conditions [99,100,101,102,103]. Furthermore, an aqueous solution of 2-hydroxypropyl-β-cyclodextrin (a green solvent) has also been applied to recover phenolic compounds from the by-products of industrial hemp oil processing [103].

4.1.3. Conventional Extraction of Terpenes

Terpenes such as α-pinene, β-pinene, β-myrcene, limonene, terpinolene, linalool, α-terpineol, β-caryophyllene, α-humulene, and caryophyllene oxide are known as the major constituents of Cannabis essential oils [72,75]. Similar to cannabinoids and phenolic compounds, most studies reported in the literature have been performed on the industrial hemp variety of C. sativa [104,105,106]. Distillation techniques such as hydro-distillation and steam distillation have been implemented to extract essential oils (terpenes) from Cannabis. However, they were less effective than the advanced supercritical fluid extraction at a lower temperature [105]. Interestingly, the GS–MS analyses in the same study revealed that the steam distillation at 130 °C and hydro-distillation at 110 °C showed 37 and 35 terpenes, respectively, in the essential oil of C. Sativa, whereas essential oil extracted with supercritical fluid at 45 °C showed only 30 terpenes [105], indicating the generation of terpenoid artefacts.

Solvent-based (both polar and nonpolar) conventional extraction methods have also been implemented to isolate terpenes from Cannabis [66,67,75,107,108]. For example, Ibrahim et al. [72] used an ethyl acetate, ethanol, methanol, and chloroform/methanol (1:9; v/v) mixture and reported that ethyl acetate was the best solvent to recover terpenes from Cannabis [72]. However, mixtures of organic solvents are generally more effective for extracting terpenes from Cannabis than individual solvents. For instance, a study on the inflorescences of C. sativa found that the hexane and ethanol mixture at 7:3 (v/v) is more efficient in extracting terpenes compared to hexane or ethanol alone [67].

Fischedick et al. [66] used ethanol as the extraction solvent to recover both terpenes and cannabinoids, and 36 compounds were identified in 11 varieties of C. sativa [66]. Conventional ethanolic extraction was also used by A. Hazekamp and Fischedick [88] to isolate monoterpenes (α–pinene, myrcene, and terpinolene); sesquiterpenes ((E)–caryophyllene and α–humulene) [88]; and oxygenated terpenes (guaiol, γ_eudesmol, and α_bisabolol) from marijuana and medical Cannabis inflorescences [82].

Six different preparation methods were employed in a recent study to obtain Cannabis oils with high cannabinoids and terpene contents [109]. In this study, conventional extraction with olive oil or ethanol, along with steam distillation, was included. In conclusion, it was recommended that Cannabis should be macerated at room temperature to obtain the optimal terpene and cannabinoid yields in Cannabis oil [109]. Interestingly, a previous study reported that drying methods also influence the terpene composition of Cannabis extract, and gentle drying with a nitrogen stream can retain monoterpenes and sesquiterpenes in the Cannabis extract [82]. Thus, the dehydration of samples before extraction should be optimised to prevent the degradation of terpenes.

In summary, although various conventional extraction techniques have been applied to extract terpenes, cannabinoids, and phenolic compounds from Cannabis, most studies have primarily focused on the industrial hemp variety without optimisation. Therefore, further investigations are needed to optimise the conventional extraction parameters, such as type of solvent, sample-to-solvent ratio, temperature, and time, which could benefit the recovery of these compounds from both industrial hemp and medicinal marijuana. The implementation of mathematical prediction models is also recommended to facilitate the optimisation process to obtain greater yields of bioactive compounds in Cannabis extracts. Impacts of the variations related to season; geographical location; and Cannabis type (strain, chemotypes, and chemovars) on the recovery of these compounds in Cannabis extracts or oils should also be considered while designing future studies.

See also  CBD Oil Franchise Opportunity

4.2. Advanced Extraction Techniques

Open-loop and closed-loop systems with butane hash oil (BHO) have been applied to extract terpenes with more flavours and aroma from Cannabis. However, the closed-loop system is often used, as it is much safer and with more advantages than the open-loop setting [110]. BHO is one of the cheapest and efficient solvents that offer the most desired final product. However, its most common disadvantage is being hard to handle in bigger batches, as it is highly flammable, colourless, and odourless [111]. Therefore, the legal use of BHO is restricted to licensed producers [112]. The closed-loop system consists of a butane reservoir, trim tube, evaporation chamber, vacuum pump, recovery pump, vacuum oven, and gas detectors. This system provides a more stable and environmentally friendly platform for dealing with volatile BHO.

A multi-solvent extraction system, such as PX 40, has been applied to effectively extract phytochemicals from Cannabis. PX 40 typically functions using either butane or propane or a mixture of both. Despite its high cost, it is a productive system [113]. In addition, the pressurised liquid extraction (PLE) technique has been applied to extract phytochemicals from Cannabis. Common solvents like water, methanol, acetone, and hexane have been applied to extract the phytochemicals for a short time under high temperature and pressure (temperature range of 75–150 °C and pressure of usually 10.4 MPa). In this technique, when increasing the temperature, the internal pressure in the cell is consequently increased and push the components to the outside of the cell through the cell wall pores [114]. Subcritical carbon dioxide (CO2) extraction systems with specialised pressure and controlled temperature have also been applied to extract high-quality cannabinoids, terpenes, and flavonoids. This technique is an effective nonpolar extraction method [115]. In addition, carbon (IV) oxide is also an effective method to extract CBD oil, with up to a 90% extraction efficiency [116].

Supercritical fluid extraction with CO2 (SFE-CO2) has been applied to extract phytochemicals from Cannabis. This technique is more effective compared to subcritical CO2 extraction systems [115]. It should be noted that solvents used and other factors, such as temperature, pressure, and sample types, can affect the extraction yield of this technique. The best conditions for extracting phytochemicals were found with a back pressure of 12 MPa, a flow rate of 10 mL/min CO2, and a pump rate of 1 mL/min, with a temperature of 25 °C. The solvent gradient conditions were 100−50% solvent A and 0−50% solvent B, and the time was 0–25 min, and all the extractions were run in two cycles [117,118,119]. When scaling up in a pilot-scale using SFE-CO2 (SCF100 model 3 PLC-GR-DLMP, Separeco S.r.l, Pinerolo, Italy), 10 MPa pressure and a temperature of 40 °C were the best conditions [120].

Other advanced extraction techniques, such as dynamic maceration (DM), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), have been applied to extract phytochemicals from Cannabis [73]. The DM technique focuses on maceration of the Cannabis in organic solvent, then concentrating the extracted solution by removing the solvent under reduced pressure, high temperature, and acid. However, the chemical structures of the final target compounds can change during the extraction process [68].

MAE and UAE have been found to effectively extract phytochemicals from Cannabis [73,121]. Different factors can influence the extraction efficiency of phytochemicals from Cannabis using UAE and MAE, such as the type of solvent, sample size, sample-to-solvent ratio, time, and power. However, none of the previous studies comprehensively compared and established the optimal conditions for these two techniques when extracting cannabinoids, phenolics, or terpenes from Cannabis.

The nonthermal pulsed electric field-assisted technique (PEF) has been applied to extract oil from Cannabis seeds. This method is effective, with less risk of thermal degradation of the phytochemicals [122]. PEF has been found to have higher extraction efficiency with better oil quality [74,123,124]. However, the main disadvantage is that PEF requires high-voltage pulses [125].

The enzyme-assisted extraction technique (EAE) has also been utilised to extract oil from Cannabis. Enzymes like pectinase or cellulose, either alone or in mixtures, are applied during the extraction process to release phytochemicals from the plant cells [126] Kitrytė et al. [127] reported that EAE increased the recovery of cannabinoids from Cannabis by 20.2% (w/w) of the water-soluble constituents and 94% of mono- and disaccharides [127]. There are two EAE techniques, including enzyme-assisted cold pressing and enzyme-assisted aqueous extraction [128]. Although EAE is an expensive technique, it is very promising for the effective extraction of phytochemicals from Cannabis. The extraction of phytochemicals from Cannabis are summarised in Table 1 .

5. Future Considerations for Effective Extraction of Bioactive Compounds from Cannabis

As Cannabis is a rich and diversified source of phytochemicals, it would be challenging to have an optimal extraction technique or condition to recover all bioactive molecules from it. Although numerous conventional and advanced techniques have been employed to extract phytochemicals from Cannabis, as discussed in Section 4, there are still gaps for future studies to understand more about the materials, the impact of different extraction parameters, and the stability of phytochemicals derived from Cannabis. Therefore, future studies should focus on the gaps summarised in Figure 4 . As discussed in Section 4, no comprehensive studies have compared the phytochemicals, including cannabinoids, phenolics, and terpenes, between different species and their different parts, such as leaves stems, flowers, and roots. In addition, the influence of geographical locations, harvesting season, harvesting time, and cultivation methods on the Cannabis phytochemicals needs to be considered to have high-quality starting materials for extraction. Systematic investigations are also necessary to understand the impact of different transportation, storage, and drying conditions and methods on the retention of cannabinoids, phenolics, and terpenes from Cannabis. As these phytochemicals are sensitive, storage and transportation under appropriate conditions are crucial. In addition, drying can affect phytochemicals from Cannabis [82], and further studies on different drying conditions and methods are needed to identify the best drying conditions and methods for Cannabis before the extraction process.

Proposed gaps for future studies.

Various conventional and advanced techniques have been applied to extract phytochemicals from Cannabis. However, most of these studies have focused on the individual impact of a few extraction parameters and have not considered all the possible factors and their interactive effects. Future studies are recommended to consider all possible parameters, as discussed in Section 3, and determine their individual and interactive effects on the extraction efficiencies of different phytochemicals from Cannabis. A comparison of the effectiveness of different extraction techniques under their optimal conditions is also needed to generate clear scientific evidence on the most effective extraction techniques and conditions.

It is typically complicated to study multiple factors and their interactive effects. Therefore, mathematical models such as response surface methodology are recommended to design, predict, and obtain the desired outcomes. Future studies should consider the cost-effectiveness of extraction techniques as well for commercial applications. We highlighted that extraction efficiency is not the sole criteria for the selection of the appropriate extraction technique, where the cost for extraction is equally important. Finally, more studies are needed to isolate compounds in groups or individually from Cannabis, test their properties, and propose further applications as therapeutic agents or functional ingredients.

6. Conclusions

Despite the growing interest in Cannabis and its bioactivity, as demonstrated in several preclinical and clinical studies, reports optimising the extraction techniques and factors to recover bioactive compounds such as terpenes, cannabinoids, and phenolic compounds from the medicinal marijuana variety of C. sativa are limited in the literature, with most studies utilising the industrial hemp variety. This limitation might be attributed to the limited availability of medicinal marijuana due to the regulations imposed in different countries on its cultivation and utilisation. However, previous studies have demonstrated that the yield and bioactivity of phytochemicals are primarily influenced by the extraction techniques implemented. As aforementioned, several factors such as the types of plant materials, extraction techniques/time, solvents, pH, temperature, pressure, and material-to-solvent ratio can influence the extraction efficiency of bioactive compounds from plant matrices. Therefore, further investigations to optimise these factors could be advantageous to recover bioactive compounds from both industrial hemp and medicinal marijuana. As the optimisation of these factors can be highly expensive, time-consuming, and labour-intensive, the utilisation of mathematical prediction models could accelerate the optimisation process for both conventional (e.g., Soxhlet extraction, maceration, hydro-distillation, and steam distillation) and advanced extraction techniques. The most common extracted methods used in the Cannabis industry are pressurised liquid extraction, subcritical CO2 extraction, supercritical fluid CO2 extraction, nonthermal pulsed electric field-assisted, MAE, UAE, and enzyme-assisted extraction. Furthermore, the impacts of the variations related to season; geographical location; and Cannabis type (strain, chemotypes, and chemovars) on the recovery of phytochemicals in Cannabis extracts or oils should also be considered whilst designing future studies.

Acknowledgments

Figure 1 , Figure 2 , Figure 3 and Figure 4 were created with Biorender.com.

Author Contributions

Conceptualisation and design, H.M.S.A.U. and Q.V.V.; writing—original draft preparation, abstract, introduction, and advanced extraction techniques, H.M.S.A.U.; major bioactive compounds in cannabis, M.A.A.; factors affecting the extraction efficiency of bioactive compounds, Q.V.V.; abstract, conclusions, conventional extraction of Cannabis sativa, and future considerations for the effective extraction of bioactive compounds from cannabis, D.J.B.; abstract, introduction, and future considerations for the effective extraction of bioactive compounds from cannabis, A.B.; figure design, Q.V.V., D.J.B. and H.M.S.A.U.; and writing—review and editing, Q.V.V., D.J.B., H.M.S.A.U. and M.A.A. All authors have read and agreed to the published version of the manuscript.

Funding

H.M.S.A.U. Research was funded by MGC Pharmaceuticals Limited, Australia.

CBD Extraction: How Is It Done And What Is Full Spectrum Oil?

By now, it seems like just about everyone has heard about CBD products. You might have a friend or family member who is always raving about the benefits of CBD.

You may have even heard people talking about these products in the news, on your favorite podcast or within the health and wellness community. Full spectrum hemp extract is getting a lot of attention, and it seems like people are only becoming more interested in it over time.

These products aren’t likely to be a fad or trend that people just forget about in a few years. Many people say CBD extract has inspired a general sense of wellness and optimized their enjoyment of life.

If you’re interested in these products, learn more about what they are, where they come from and how they’re made. Educating yourself will make it easier when you decide to shop for the best CBD products online.

Where Does Full Spectrum Hemp Oil Come From?

The name says it all. Full spectrum hemp extract is just a refined hemp product. A CBD extraction process uses pressure, temperature, solvents or a combination of the three to collect the most desirable natural components from the hemp plant.
This concentrated form of CBD and other organic compounds from the plant is hemp extract oil. Like almost anything else you can buy, the finished product’s quality will largely depend on the materials you start with.

What Separates Premium Hemp From the Rest?

Think about it this way: if you were going to buy lemon extract, would you want it made with dry, old lemons? Or would you rather it be made with fresh, aromatic fruit? Most people would almost definitely say they’d rather have something that’s made from superior plant material. After all, it hardly seems like there’s a point to extracting the essence of something underwhelming in its natural form.

The same goes for hemp extracts. The best full spectrum hemp oil is made by using the best natural hemp. Naturally, healthy plants often taste better, smell better and contain more cannabinoids like CBD. This is especially important if you’re taking a whole-plant approach by buying full spectrum hemp oil, as opposed to CBD isolate. Compare these two types of CBD extracts to see why the source material’s quality matters so much.

Full Spectrum Hemp Oil Vs. CBD Isolate

Most people eventually have the same question once they start shopping for hemp online: “is full spectrum CBD oil better than CBD isolate?” Most of the experts say they gravitate more toward full spectrum products, but it comes down to personal preference in some ways. Here’s what you need to know about the most popular types of CBD products.

See also  CBD Gummies Pure Hemp Extract

Full Spectrum CBD

Full spectrum CBD is what you get from products that take a holistic approach to CBD extraction. In addition to CBD, full spectrum extracts also contain all of the other cannabinoids and terpenes found in hemp.

Terpenes, fatty acids and other plant-based compounds may help the CBD interact with your body more thoroughly. Since you’re getting all of the different organic compounds from hemp in your full spectrum hemp oil, it’s essential to make sure that the extraction company starts with excellent hemp.

Broad Spectrum CBD

Broad spectrum CBD is full spectrum CBD that’s just been refined ever so slightly in order to remove all traces of THC. While broad spectrum CBD will still have some of the cannabinoids and terpenes found in full -spectrum CBD, it will lose significant amounts of its minor cannabinoids and terpenes during the winterization process. With no THC, broad -spectrum CBD can give people that have concerns about even trace amounts of THC in their systems peace of mind.
CBD Isolate

CBD isolate is significantly different from full -spectrum hemp oil and even broad spectrum hemp oil. This process involves a thorough winterization process to remove terpenes, cannabinoids, waxes and other natural parts of the hemp plant.

This is ideal for people who only want pure CBD because, as the name implies, the cannabidiol has been isolated in this particular type of hemp extract. Many experts say that the whole-plant, full -spectrum approach is best, but some people still prefer to buy CBD isolate because they think it seems purer with the rest of the plant removed.

Hemp vs. Marijuana Vs. Cannabis

One of the biggest reasons some people don’t want full spectrum CBD is that they want to avoid trace amounts of THC. If that doesn’t quite make sense, just learn more about the differences between hemp, marijuana and cannabis.

Cannabis

The cannabis plant comes in many shapes and sizes. It’s related to the hops plant and some others you may have heard of. Here in the United States, we categorize different cannabis plants as either hemp or marijuana for legal reasons, which is especially important since there’s still a prohibition on marijuana on a federal level.

Marijuana

In the United States, marijuana is what they call any cannabis plant that contains levels of THC higher than 0.3%. THC is a psychoactive cannabinoid that has been legalized in many states (either medicinally or recreationally) but is still illegal on a federal level.

Hemp is legal on a federal level here in the United States. To qualify as hemp, a cannabis plant must have THC levels no higher than 0.3%. Since hemp is legal, and CBD is legal, hemp-derived CBD products are also legal. In other words, for your full -spectrum hemp oil to be legal, it can’t come from a plant that contains more than 0.3% THC.

Is There THC in CBD Extract?

Hemp plants are technically allowed to contain up to 0.3% THC, though most hemp plants are grown to eliminate THC altogether when possible. Even so, there may be minimal amounts of THC in hemp oil. While this is more likely in full spectrum hemp oil containing all of the cannabinoids and terpenes from the natural plant material, some companies that claim to produce CBD isolate may not be testing their products well.

With all of that in mind, it’s essential to know the following before you buy CBD online:

  • Is it ok with you if your product contains trace amounts of THC? It’s not at all likely that legal hemp oil would cause you to become intoxicated or fail a drug test, but it’s also not entirely impossible.
  • How much CBD oil will you be enjoying? Even trace amounts of THC can add up.
  • Do you trust the company that runs the online CBD store? If you don’t trust the company’s integrity, or if they don’t publish their lab results, there’s no way of knowing what’s really in their oils.

Learn more about how to extract CBD in part two to determine what makes a good CBD Extract.

We’ve already covered the different types of CBD oil, so now you’re ready to get into more details about how CBD extraction works. When you understand the process that turns the plant into hemp extract oil, you’ll see how these convenient products preserve the original material’s natural essence. Many smart people are working to figure out how to extract CBD more effectively, but you don’t have to be a scientist to understand some of the basics.

How to Extract CBD

To make a CBD extract, you need to start with either hemp or marijuana. Once you have your source material, you can make full spectrum hemp oil in a few different ways. While we make our end products in-house, we do not buy hemp flower in mass or handle extraction. Instead, we partner with the best extractors in the industry to obtain our raw materials. In order to meet our high standards, we vet our extraction partners carefully and require full traceability to confirm the quality and purity of their source material and extractions.

Ethanol Hemp Extraction

The most common way to perform a CBD extraction is to use a liquid solvent like ethanol (alcohol). Ethanol is non-toxic and relatively easy to evaporate, making it a good choice for creating hemp extracts. Once the liquid has pulled the cannabinoids out of the plant by running over it, the alcohol can be evaporated. At this point, all that’s left are the cannabinoids, terpenes and other natural organic compounds from the plant.

Propane or Butane Extraction

The other way to extract CBD from hemp is to use a solvent like propane or butane. This solvent is usually washed over the hemp material in a large piece of lab equipment called a closed-loop extraction system. Like other types of solvents, the gas will strip the cannabinoids out of the plant material to be collected with the solution. Making hemp concentrates in this way requires a careful purging process to remove all of the solvents at the end. Propane and butane are not safe for human consumption, so there can’t be any left in the final product.

CO2 Hemp Extract

The other common way to extract CBD is by using carbon dioxide (CO2) in a supercritical form, which is another way of saying it’s pressurized into an especially dense state that’s somewhat like a liquid and a gas at the same time. This process works somewhat similarly to the processes that run with other kinds of solvents. Working with CO2 is great because it’s relatively easy to change from a solid to a liquid to a gas by manipulating the pressure and temperature. This allows hemp oil producers to extract cannabinoids from hemp very efficiently with CO2.

A CO2 extraction process normally requires three different chambers. In the first chamber, there’s liquid CO2 that’s pressurized enough to turn the carbon dioxide into a liquid. The second chamber is full of your plant material, which is legal hemp in this case. The extraction machine pumps highly-pressurized liquid CO2 into the second chamber, where the temperature is slightly higher. Since the temperature is higher, the carbon dioxide becomes a supercritical gas, which quickly removes cannabinoids and other desirable compounds from hemp.

The CO2 washes over the plant material until it’s essentially absorbed the cannabinoids from the hemp. Once the cannabinoids are out of the hemp and into the solution, the solution moves into the hemp extraction system’s third chamber. The pressure is dramatically reduced in the third chamber until the CO2 turns back into a normal gas like it normally would be at room temperature. The carbon dioxide gas releases the cannabinoids and rises, so the extracted hemp oil collects at the bottom of the chamber.

Oil Extraction

This is the final type of extraction process we’ll cover. This CBD extract is made simply by heating the hemp in oil. Doing this allows the cannabinoids to be activated and released from the hemp, transferring into the oil. Some manufacturers use olive oil, MCT oil or something similar.

No matter which of the extraction processes are used to create hemp oil, the extract will contain other cannabinoids besides CBD. CBD should be the most prevalent cannabinoid in the hemp oil (assuming actual hemp was used, not marijuana). Some extraction processes move on to a winterization stage to remove other natural compounds and isolate the CBD. Still, full spectrum hemp extract includes everything that was pulled out of the plant.

In addition to CBD and other cannabinoids, you can find all of the following things in full spectrum hemp oil:

  • Terpenes – these are like the essential oils that give cannabis its unique flavor, and some believe they have therapeutic effects
  • Amino acids
  • Omega-3 fatty acids
  • Vitamins A
  • Vitamin B (various types)
  • Vitamin C
  • Vitamin E
  • Minerals like magnesium, iron, calcium and zinc

How Is Full Spectrum Hemp Oil Tested?

It’s critically important to test any kind of hemp oil. Even if something is labeled as CBD isolate, you should still see the third-party lab tests that back that up. Testing is important for three primary reasons:

  • It confirms the level of CBD products. One of the biggest problems we see in this industry is that some companies sell products that are marketed to contain specific amounts of CBD, but the products themselves don’t live up to the labels. To put it quite simply, this is a dishonest way of doing business, and it’s not right to charge people without delivering the quality product they’re paying for.
  • Even beyond the quality and consistency of hemp oil, purity is one of the main reasons we have all of our hemp extracts tested thoroughly. We want to know if there are any leftover solvents or other impurities that might not benefit our customers. If a product isn’t tested and it isn’t from a company that you have good reason to trust, there’s just no way of knowing how it could be contaminated.
  • We’re independently lab-testing for THC content in our final products. This is a big one, especially when you’re buying full spectrum hemp oil. In addition to CBD, full spectrum hemp extract also contains other phytocannabinoids like CBN, CBG, CBC, CBDA and more. Since we want it to be legal throughout the United States, we have to test every batch to make sure it contains no more than 0.3% THC. Please see our Lab Results page for more information.

Buy Full Spectrum Hemp Oil Online

At Harbor Hemp Company, we partner with the top extractors in the industry who use state-of-the-art technology and equipment to turn premium hemp flower into a superior CBD extraction that we used to make our premium, finished CBD products. Our full spectrum hemp oil, along with all of our products, are always third-party tested to ensure quality, purity and cannabinoid levels.

Our family-run business is on a mission to make reliable hemp products available to everyone. Our family has been sourcing oils and plant extracts since 1936, and we use the generations of experience to make the best hemp-derived CBD oil we possibly can.

Order some today to see what makes our full spectrum hemp oil so special.

CBD Oil Extraction & Processing

Consumers are discovering the health benefits of CBD oil which is becoming a key ingredient in many products on the market today, including: Beverage infusions, sports nutrition, topicals/creams, digestive remedies and medicines/supplements. The incorporation of CBD oil is becoming a mainstream focus for many producers wanting to offer consumers their own unique formulations. Whatever the product, whatever the recipe, SPX FLOW has the equipment solutions you need for downstream CBD oil processing.

Why SPX FLOW?

SPX FLOW equipment

SPX FLOW manufactures robust equipment around the world using local and globally sourced materials. Whether you are trying to move, control, heat, cool, mix or blend your product, SPX FLOW adds value where you need it most.

SPX FLOW application knowledge

When you partner with SPX FLOW you gain from decades of processing experience and deep application knowledge from our global team of specialists. We look forward to solving difficult production challenges using our proven technology and industry know-how.

SPX FLOW support

With our global network of factory trained, local stocking distributors you can be assured knowing that support is where you need it when you need it. In addition to our channel network we also offer maintenance and troubleshooting videos, state of the art innovation centers for formulation testing and process validation with scale up consultation to fit the capacity needs of your production requirements.

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.